If you’re a do-it-yourselfer, you’ll want to consider installing a peel and stick stainless steel backsplash. They’re easy to install, but there are a few things to remember and avoid. Here’s a quick guide to install your new backsplash:
Easy to install
You can make an easy to install stainless steel peel and stick backsplash with a few basic tools. To start, you should make sure that your walls are perfectly flat and level. You can use a long straight board or a metal straightedge to help with this. If your walls are uneven, be sure to use joint compound to level them. Fill in humps and low spots with joint compound, and feather out high areas with a utility knife.
To create a seamless look, you can choose a tile-look backsplash. There are tiles in different shades and sizes that look like real tile. In addition, you don’t have to worry about grout or cement. Depending on your preferences, you can choose from a large variety of patterns and colors. There are also a variety of styles and materials for peel and stick backsplashes. These options are designed to replicate the look of a professional backsplash.
Can lead to mistakes
If you’re new to the process of putting up a backsplash, there are some things to keep in mind. Although stainless steel is fairly stain resistant, splatters, spills, and other potential mishaps should be cleaned up immediately. While it is not impossible to remove these messes, you’ll want to avoid using abrasive cleaners or brushes that might damage the backsplash.
When installing a best stick on backsplash, you should carefully measure the space that you plan to cover. You can purchase individual tiles or a whole sheet, depending on how much space you have. Peel and stick backsplashes don’t require grout, tile spacers, or sealants. They’re affordable and won’t discolor over time. Using them in the kitchen can be a great way to give your room a new look without spending a fortune.
Material options
There are many types of peel-and-stick stainless steel backsplash products to choose from. You can install a simple sheet or a mosaic, or create a pattern with the tile. If you’re installing a backsplash in a wet area, you can choose between cement board or cork backing. The latter option is more practical as it’s lighter in weight than ceramic tiles. You’ll find different tile styles at different price ranges.
Stainless steel tiles usually come in square or rectangular shapes and are sold in packs of a square foot. Many of these tiles have cork or other backing, and some come with an adhesive that is peel and stick. Stainless steel tiles are also available in embossed or textured designs. While the latter option is more difficult to clean, it may be worth the extra expense for a backsplash in the kitchen.
Cost
A Stainless Steel Backsplash can be expensive, adding thousands of dollars to your remodeling budget. Thankfully, you can find a calculator to help you determine how much the backsplash will cost. Using a 10×10 square is a good starting point because the materials typically cost around $125 per square foot. Granite Countertop companies will have lower overhead than a tile backsplash company, so a good time to shop for a backsplash is in late fall or early winter. Expect to be offered aggressive pricing discounts during this time.
Conclusion
One of the major downsides of installing a peel-and-stick backsplash is that the adhesive will wear down. Without permanent adhesive, it could peel off, ruining the surfaces behind it. If you plan to sell your house soon, consider the cost before purchasing a backsplash with this material. Buyers are now and will look for a cheaper fix. You will want to check the manufacturer’s warranty before you purchase the backsplash.
